Aluminium Composite Panels, made to drawing.
PVDF and FEVE-coated ACP panels — routed, formed, gasketed and installed on aluminium sub-frames. We handle everything from the V-groove fold to the final corner trim. Project sheets, mill certificates and finish samples available with every quote.
- Alstrong, Aludecor & Alpolic panels
- PVDF / FEVE / Nano coatings
- Rear-vented & pressure-equalised systems
- Custom routing & CNC profiling
- 4 mm — 6 mm panel thicknesses
- Fire-rated A2 grade options
Glazing systems that read as a single skin.
Spider systems, fin-supported glazing, four-sided structural silicone façades and stick-built curtain wall — designed for wind loads, thermal performance and the silhouette your architect drew.
- Saint-Gobain / AIS / Guardian glass
- Spider & patch-fitting systems (SS 316)
- Stick-built curtain wall
- Double-glazed insulated units
- Toughened, laminated, low-E options
- U-value & SHGC engineered to brief
Unitised curtain wall, factory-assembled.
Floor-by-floor unitised systems pre-fabricated in our Indore workshop, hoisted and clipped onto sub-structure. Faster on site, tighter tolerances, fewer trades hanging off a swing-stage.
- Unitised & semi-unitised systems
- Factory glazing & QC
- Embeds & bracketry engineered in-house
- Site mock-ups for water tightness
- Compliance with IS 875 / IS 1893
- Single-source warranty
Doors, windows & louvres, made-to-spec.
Casements, sliders, fold-and-slide doors, louvred ventilation and architectural screens — fabricated from named-brand extrusions and German-grade hardware. Standard sections or custom.
- Jindal / Hindalco / Schüco extrusions
- Casement · slider · tilt & turn
- Multi-track sliding systems
- Roto / Sobinco / GU hardware
- Powder-coated & anodised finishes
- Mosquito & security mesh integration
Premium thermal-break systems.
European-style system windows from Schüco-grade extrusions — with continuous thermal breaks, multi-point locks and engineered weather seals. For projects where the BTU bill matters.
- Schüco AWS 50.NI / 75.SI series
- Polyamide thermal break (24 mm+)
- Triple-seal weather gasketing
- Acoustic ratings up to 42 dB
- Tested per IS 11645
- 5-yr labour, 10-yr profile warranty
Ventilated façades with character.
High-Pressure Laminate cladding on rear-vented sub-frames — for projects that want timber, stone, terracotta or graphic finishes without the maintenance overhead. UV-stable to a decade.
- Trespa Meteon / Greenlam Clad
- 40+ wood, stone & solid finishes
- Rear-ventilated sub-frame design
- Concealed & exposed fixing options
- Class-B fire rating available
- Low-maintenance, no re-coating
Sub-frames, brackets, canopies — to drawing.
All the steelwork that holds a façade up. Welded sub-structures, mullion brackets, sun-shades, canopies and balustrades — fabricated, finished and delivered to site by our own crew.
- MIG / TIG / SMAW welding
- Hot-dip galvanising
- Powder-coat & epoxy finishes
- Mill-certified MS, SS & aluminium stock
- Site-survey & load engineering
- NDT & weld-test reports on request
